Wireless Ultrasonic Level Sensor is a combination of wireless sensor transmitter WS433-M12F and Ultrasonic level sensor, measure the level of liquid surface of water, oil ... This level sensor utilises the ultrasonic technology to measure the surface of liquid or solid, the principle is to measure the time of flight of the ultrasound pulse in the air environment. The wireless portion is Sub-GHz technology from Texas Instruments allows long range transmission at ultra-low power consumption. It will connect 2-way wirelessly to the wireless co-ordinator WS433-CL to send data and receiving the configuration. It can be configured the operation parameters like data sending interval, health check cycle...remotely from Globiots platform or via ModbusRTU software (thru the WS433-CL). Its default data rate is 50 kbps, can be switched to 625 bps to increase the communication range. It can last up to 10 years with a single AA battery. There are many applications such as monitoring of river water levels, water tanks, etc.
Sensor can be bought to communicate with our iConnector through 433Mhz RF, this can be connected using RS485 Modbus or NB-IoT connected to any IoT device management software. Or connect it to Templogger Pro Device management based on the cloud.
Just need the dimensions of the tank, drill a hole in the top and secure the sensor with the bracket provided.
|Ongoing maintenance required and support provided in Australia|
|Units deployed commercially||2|
|Data ownership policy|
|Data privacy and security policy|
|Company||Templogger Pty Ltd|
|Supported Regions||All of Australia|
Terms and conditions apply. Please refer to our legal statement.